▶ What you should know before using
- Non-reflective Background
- Refrence card of the same material as the pattern
- Card Size = 86 x 54 mm
※ Credit Card Size (85.6 x 53.98 mm) is OK - A maximum of 20 patterns can be recognized at one time.
- The maximum area that can be recognized is approximately the size of an A0 paper.
- 120 x 90 cm (47 x 35 inch)
- The valid shooting height is 30 ~ 90 cm ( 1 ~ 3 ft )
- Patterns may not be recognized if you shoot from a very high position.
▶ Shooting
- Adjust the height of your smartphone so that all patterns are inside the green square.
- Outside of the green rectangle, only the background should be visible.
- Place the sensor on the pattern.
- When you press the shooting button, the sensor starts operating.
※ It is not taken right away. - If you keep the position where the red circle is not visible for about 1 second, the picture will be taken automatically.
- Blue is recognized as a pattern, and red is recognized as a reference card.
- Anything without color is an unrecognized pattern.
※ If it is too small or over the green outline, etc. - Star ratings and comments are the result of the scan’s shooting conditions.
※ Photos with high ratings are good to process, but there are cases where even low ratings can be processed, so please refer to the message. - Press the yellow “Play” button to start processing the pattern.
▶ Be careful!
- The table must not be photographed.
- There should be only the background.
- The refrence card must be included.
- There must be a pattern or card in the middle.
- Patterns outside the green rectangle are not recognized.
- Be sure to place all patterns inside the green rectangle.
▶ Let's start
This is basic usage of scan tool.
Just take a picture, app can measure the size and width of the pattern.
Let’s see how to use it in beginner mode.